Excelta

The 4-CO five star Cobaltima tapered extra fine pointed tweezer with tips .0024 wide x .0008 high is ideal for microscopy. The tweezer is made of a cobalt alloy, which is extremely hard, temperature resistant to 932 F and corrosion resistant. The body is...

The 4-SA three star straight tapered ultra-fine pointed tweezers is primarily used for microscopy. The overall length is 4.25. It is made of anti-magnetic Neverust stainless steel.Specs amp; FeaturesUltra Fine PointsApplication: Designed for microscopy,...

The 4-SA-ET three star straight tapered ultra-fine pointed tweezers is primarily used for microscopy. The overall length is 4.75. It is made of anti-magnetic Neverust stainless steel. It Features: Ergo-Tweezesoft cushioned ESD safe (10 ohmssq) ergonomic...

The 4-SA-PI two star straight tapered ultra-fine pointed tweezers is primarily used for microscopy. The overall length is 4.25. It is made of anti-magnetic stainless steel.Specs amp; FeaturesUltra Fine PointsApplication: Designed for microscopy, the...

The 4-SA-SE one star straight tapered ultra-fine pointed tweezers is primarily used for microscopy. The overall length is 4.25. It is made of anti-magnetic stainless steel.Specs amp; FeaturesUltra Fine PointsApplication: Designed for microscopy, the...

The 5 three star straight tapered ultra-fine pointed tweezers is primarily used for microscopy. The style 5 has the finest points available. Overall length is 4.33. It is made of carbon steel with flame hardened tips that will not bend.Specs amp;...

The 500-101A-US five star 5.5 small convexconcave forming plier is designed for forming a J Hook on wires and leads. The jaw tapers from front to back for forming various lead diameters. It Features: a molded ergonomic static dissipative (10 ohmssq) grip...

The 500-101-US five star 5.25 small convexconcave forming plier is excellent for forming small wires and leads. The jaw tapers from front to back for forming various lead diameters. It Features: molded ergonomic static dissipative (10 ohmssq) grips with...

The 500-103B-US five star 5.5 transistor forming plier is designed to form TO-220 style transistors with 3 or 5 leads. Component leads are formed .600 from the body of the component. It feature molded static dissipative (10 ohmssq) ergonomic grips with...

The 500-103-US five star 5.5 transistor forming plier is designed to form TO-220 style transistors with 3 or 5 leads. Component leads are formed .200 from the body of the component. It feature molded static dissipative (10 ohmssq) ergonomic grips with...

The 500-104B-US five star 5 transistor forming plier is an elaborate design for forming 5 leads on a TO-220 component in one easy operation. The tool will ensure uniformity of difficult lead alignment. It Features: a molded static dissipative (10 ohmssq)...

The 500-104-US five star 5 transistor forming plier is used in forming 3 leads on a TO-220 style transistor. The two outside leads will be bent .200, while the center lead is bent .300 from the body of the component. It Features: molded static...

The 500-105A-US five star 5 forming plier provides stress relief for dual axial lead components. It is designed for forming all leads of a component prior to surface mounting. It Features: molded static dissipative (10 ohmssq) ergonomic grips with dual...

The 500-108-US five star 5 shear cutting and bending plier is designed to bend leads to 45 degrees, then cut the lead to .060 keeping component in place when soldering. Its recommended cutting capacity is 22AWG (.025 diameter). It Features: a molded...

The 500-13A-US five star 5 long .375 flat pack forming pliercutter will form a Gull Wing and cut multiple leads to length on various types of flat packs. It is recommended for .010 or smaller lead thickness. It Features: molded static dissipative (10...

The 500-13B-US five star 5.25 long .250 flatpack forming pliercutter will form a Gull Wing and cut multiple leads to length on various types of QFP and SOIC packages. It is recommended for .010 or smaller lead thickness. It Features: molded static...

The 500-210A-US five star 4.75 adjustable multiple lead forming plier is designed to form transistor leads with .100 center spacing. Leads are formed at 90 for through-hole mounting. The distance from the component body to the bend is adjustable from ...

The 500-210C-US five star 5.5 90 lead forming tool with the bend length supplied by customer will form transistors. It Features: molded static dissipative (10 ohmssq) ergonomic grips with dual leaf springs for smooth action.Specs amp; FeaturesMultiple...

The 500-210-US five star 5.5 multiple lead forming plier is designed to bend the leads on LEDs and other multiple lead components. Leads are formed to 90 degrees and .100 from the component body without damage. Its recommended for use on .025 diameter...

The 500-88-US five star 5 forming plier with shear cutter designed to form a consistent stand off and cut the lead to length on most popular radial lead components. It is recommended for .025 diameter or smaller leads and wires. It Features: a molded...