FG101-10 | Soldering Iron Tester (°Fahrenheit)

SOLDERING TESTER The HAKKO FG-101 Soldering Tester measures tip temperature, leak voltage, and tip-to-ground resistance. Leak voltage and tip-to-ground resistance can be easily measured due to automatic self-correction of the zero point. Resistant to drift and ambient temperature variations. Highly reliable and accurate measurements. MAX HOLD function displays maximum value when MAX HOLD button is pressed. Suitable for Lead-Free solder applications. Measures in degrees Fahrenheit. Celsius unit availabe by special order NOTE: Leak voltage is that potential resulting from the small current leaking from the tip of a soldering iron, even though the tip may be grounded. This current can damage sensitive components. The HAKKO FG-101 provides a quick and accurate means of measuring this leak voltage. Part Number: FG101-10 (see Specifications for details) Specifications Part Number FG101-10 Temperature Resolution 1F Measurement range 32F - 1300F Precision 6F (572F - 932F) 10 outside of above range Sensor K(CA) thermocouple Voltage Resolution 0.1mV Measurement range 0-40mV (AC) Precision (5 1 digit) Resistance Resolution 0.1 ohms Measurement range 0-40 ohms Precision (5 1 digit) Display Liquid Crystal Display 3.5 digits Burnout - MAX HOLD Refer to manual Monitor Output Temperature 1mVC, F Voltage 10mVmV Resistance 10mVohm Burn out -7V (MAX.) Power Consumption 120V2W Dimensions 200(W) x 50(H) x 120(D) mm (7.9W x 2.0H x 4.7D in.) Weight 1 kg (2.2 lbs.) Operation Temperature 32F104F 2090 RH Temperature sensor 191-212 can only be used to measure temperatures below 932F (500C) Note: For measurement in C, use Part Number FG101-16. CONTENTS Part Number NA FG-101 Soldering Tester B1752 Conduction plate B1754 Ground clip B1950 Conduction wire 191-212 Sensor 10 pcs B2419 Power cord ACCESSORIES Part Number A1310 Temperature probe for soldering pot B2468 Fuse 125V-5A 191-212 Sensor 10 pcs A1556 Thermocouple Sensor A A1557 Thermocouple Sensor B APPROVED