Excelta

The 14A-GW three star 80 angulated slim cutting tweezers has a new, thinner body designed to be lightweight and easy to handle. The cutting capacity is 0.010 soft wire. The overall length is 4.38. It is made of carbon steel with flame hardened edges...

The 2000A is a Five star Roto-pic replacement hand pieceSpecs amp; FeaturesRoto-Pic Hand PieceQuality: , Trade Name: Roto-Pic

The 2022 is a Roto-Pic vacuum curved short probe (45)Specs amp; FeaturesRoto-Pic Probe Quality: , Surface Resistivity : Conductive, Shape: Short Bent, Tip Angle: 45, Trade Name: Roto-Pic, Material: SS, Tip Width: na

The 422 five star twenty-two power eye loupe has two element optical glass construction. It is a bright, sharp focus loupe with 360 degree clear acrylic base to admit light from all directions and a wide range of view.Specs amp; Features22X...

The 4-CO five star Cobaltima tapered extra fine pointed tweezer with tips .0024 wide x .0008 high is ideal for microscopy. The tweezer is made of a cobalt alloy, which is extremely hard, temperature resistant to 932 F and corrosion resistant. The body is...

The 500-210-US five star 5.5 multiple lead forming plier is designed to bend the leads on LEDs and other multiple lead components. Leads are formed to 90 degrees and .100 from the component body without damage. Its recommended for use on .025 diameter...

The 500-88-US five star 5 forming plier with shear cutter designed to form a consistent stand off and cut the lead to length on most popular radial lead components. It is recommended for .025 diameter or smaller leads and wires. It Features: a molded...

The 500-89-US five star 5.5 dog leg lead forming pliercutter is designed to increase or decrease the center dimension on radial lead components. The added shear cutter saves component prep time. It is recommended for .025 or smaller leads and wires. It...

The 500-92-US five star 5.5 TO-92 lead forming plier has slots on the outside jaw to help the plier fit between the leads of a TO-92 and flare them out .050 forming a Stand-Off in the lead wires. It feature molded static dissipative (10 ohmssq) ergonomic...

The 502-US-28 five star 5.5 high precision stripping plier is ideal for stripping 28 AWG PTFE coated wires. It Features: molded ergonomic static dissipative (10 ohmssq) grips with dual leaf springs for smooth action.Specs amp; FeaturesWire...

The 502-US-30 five star 5.5 high precision stripping plier is ideal for stripping 30 AWG PTFE coated wires. It Features: molded ergonomic static dissipative (10 ohmssq) grips with dual leaf springs for smooth action.Specs amp; FeaturesWire...

The 505-20-US-ST five star 6 soft tip insertionextraction tool has soft acetal inserts eliminating scratching and nicking of delicate IC leads. The dash number references the total amount of pins on package. It Features: molded static dissipative (10...

The 505A-US five star plier has been designed to handle DIPIC package. Height is .18, width is .6 and length is 1.26. It Features: molded static dissipative ergonomic grips with dual leaf springs for smooth action.Specs amp;...

The 505E-US five star plier has been designed to handle DIPIC package. Height is .18, width is .3 and length is 1.26. It Features: molded static dissipative (10 ohmssq) ergonomic grips with dual leaf springs for smooth action.Specs amp;...

The 505F-US five star plier has been designed to handle DIPIC package. Height is .18, width is .3 and length is 1.257. It Features: molded static dissipative (10 ohmssq) ergonomic grips with dual leaf springs for smooth action.Specs amp;...

The 505J-US five star plier has been designed to handle DIPIC package. Height is .18, width is .3 and length is .966. It Features: molded static dissipative (10 ohmssq) ergonomic grips with dual leaf springs for smooth action.Specs amp;...

The 505K-US five star plier has been designed to handle DIPIC package. Height is .18, width is .3 and length is 1.398. It Features: molded static dissipative (10 ohmssq) ergonomic grips with dual leaf springs for smooth action.Specs amp;...

The 505-US five star plier has been designed to handle DIPIC package. Height is .18, width is .4 and length is 1.063. It Features: molded static dissipative (10 ohmssq) ergonomic grips with dual leaf springs for smooth action.Specs amp;...

The 507-US five star 5.5 DIPIC extraction plier allows positive gripping power to those difficult to extract ICs. It will extract most DIPICs. It Features: molded static dissipative (10 ohmssq) ergonomic grips with dual leaf springs for smooth action...

The 508C-US five star metal jaw straightening plier is designed to fit between rows of connector pins. The overall length is 5.25 while the jaws are .825 wide. The grips are ergonomically molded and static dissipative (10 ohmssq) .Specs amp; FeaturesWide...