FR410-03 | High Power Desoldering Station with Pencil-Style Desoldering Tool

140 WATT HIGH POWER DESOLDERING STATION As the design of PCBs evolve, the need for higher power desoldering tools with a wide arrange of nozzle configurations grows. The HAKKO FR-410 desoldering station is designed to fit that need and bridge the gap in power between the 70W HAKKO FM-204 desoldering station and the 300W HAKKO FR-400 ultra heavy duty desoldering station. The HAKKO FR-410 provides 140 watts of power and has the widest selection of nozzle configurations that can meet almost every need. The station includes the same popular Features: from the HAKKO FR-400, which include an anti-clogging feature that helps ensure instantaneous application of peak vacuum pressure to the solder joint. Other Features: include: a delay timer to prevent premature release of the vacuum system before solder has cleared the heater and is captured in the solder collection chamber a large easy to read display that includes a vacuum level indicator to let you know if there are restrictions building that will need to be cleaned out 3-user programmable presets process control password lockout to prevent any unauthorized changes to the systems operation or setup two variations gun-type (FR-4101) desoldering handpiece, or pencil-type (FR-4102) desoldering handpiece each handpiece has a easy access solder collection chamber that is simple to clean easy to change heater cartridge with HAKKO Composite Ceramic technology an independent nozzle, which provides a low cost of operation and a basic maintenance kit with a variety of basic cleaning tools and replacement filters. Part Number: FR410-02 (includes Gun-Type desoldering handpiece FR-4101) Part Number: FR410-03 (includes Pencil-Type desoldering handpiece FR-4102) Specifications Specifications Model Number FR-410 Part Number FR410-02 wFR-4101 Gun-Type Handpiece FR410-03 wFR-4102 Pencil-Type Handpiece Input Voltage 120VAC 5060 Hz Power Consumption 190W Temperature Range 620 - 850F (330C - 450C) Temperature Stability 9F (5C) at idle ESD Safe Yes Safety Approval Station Output Voltage 24V Vacuum Generator Pump - Double Cylinder Vacuum Pressure (max) 80 kPa 600 mm Hg (24 in. Hg) Suction Flow 15 Lmin Temperature Control Microprocessor control using closed-loop sensor Temperature Presets 3-User Programmable Sleep Enabled Yes Auto Power Off Safety Yes Low Temp Alarm Yes Process Control Lockout Yes - Password Dimensions (W x H x D) 6.5 x 5.4 x 9.6 in. 165 x 137 x 244 mm Weight (wo cord) 10.6 lb. (4.8 kg) Handpieces Model FR-4101 (Gun) FR-4102 (Pencil) Part Number FR4101-81 FR4102-81 Power Consumption 140W Nozzle-to-Ground Resistance lt; 2 ohms Nozzle-to-Ground Potential lt; 2 mV Heater HAKKO Composite Ceramic Nozzles N61 Series Standard Nozzle (included) N61-05 (1.0 mm 0.04 in.) Cord Length 4 ft. (1.2 m) Total Length (wo cord) 6.6 in. (168 mm) 8.1 in. (206 mm) Weight (wo cord) 0.38 lb. (170 g) 0.35 lb. (160 g) As measured with N61-05 nozzle installed Contents Part Number - - FR-410 Desoldering Station FR4101-81 - or - FR4102-81 FR-4101 Gun-Type Desoldering Handpiece - or - FR-4102 Pencil-Type Desoldering Handpiece FH410-81 - or - FH410-02 Handpiece Holder with cleaning sponge for FR-4101 - or - Handpiece Holder with cleaning sponge for FR-4102 C5030 Maintenance Kit Includes: B1087 - 1.0mm Cleaning Pin B1215 - Heater Cleaning Pin B1303 - 1.0mm Cleaning Drill B5106 - Nozzle Wrench A5020 - Station Filter (x2) A1033 - Handpiece Filter (x4) B2419 Power Cord - - Instruction Manual