FG100-01 | Tip Thermometer (°Celsius)

Untitled Document THERMOMETER The HAKKO FG-100 thermometer provide fast, accurate tip temperature measurements using a fine CA wire sensor (0.2). The FG-100 measures tip temperatures as well as solder pot temperatures (with optional temperature probe.) Lightweight, easy-to-replace sensors provide accurate measurement of tips for verification or calibration processes. When the MAX HOLD feature is enabled, the thermometer will display the maximum temperature measured. To preserve battery life, the auto shutoff feature turns the thermometer off when not used for three minutes. The thermometer design allows for easy measurements from right or left handed operators. The sensor (PN: 191-212) has a special metal alloy coating that resists corrosion and oxidation. Note: the 191-212 sensor can measure temperatures up to 500C (932F). For higher temperatures, please use the applicable temperature probe (see Accessories: PN A1310.) Sensor replacement is quick and easy Easy-to-read digital temperature display Part Number: FG100-01 , reads C. (see Specifications for details) Part Number: FG100-02 , reads F. (see Specifications for details) Specifications Part No. FG100-01 FG100-02 Type Centigrade Fahrenheit Resolution 1C 1F Range of Measurement 0C - 700C 32F - 1300F Applied Sensor K(CA) type thermocouple Measurement Tolerance 3C (300C - 600C) 5C other than above 6F (572F - 1112 F) 10F other than above Power Supply 9V battery Dimensions 68(W) x 140(H) x 28(D) mm 2.7 x 5.5 x 1.5 in. Weight 4.0 lbs. (115 g) 191-212 Sensor can only be used to measure temperatures below 932F (500C) APPROVED ACCESSORIES Part No. 191-212 Replacement sensors, 10 pack A1310 Temperature probe A1556 Thermocouple Sensor A A1557 Thermocouple Sensor B CONTENTS Part No. 191-212 Thermometer Sensor, 10 pcs